Inhaltsverzeichnis
Werbung
When Multi mode is selected, you can play and edit the multi programs and the single
sounds each program is based upon.
This is how you switch back to Sound mode:
1. Turn the third value dial
2. The display shows the program number and the name of the selected Sound
program again (name may be different depending on the soundset loaded):
You can also switch between Sound and Multi mode when you are not in Play mode e.g.
when editing in a parameter page. To do so, you have to turn the third value dial
labeled Sound / Multi, while holding down the Shift key
The XTk features another method to switch between Sound and Multi mode. Similar to
switching banks, you can activate the Multi mode by pressing the numeric key labeled
Multi while holding the Select button
same way by pressing the numeric button A or B while holding Select. Remember that
you still have to enter a 2 or 3 digit program number before the switch is performed.
Editing Parameters
In order to change or edit a sound or multi in the MicroWave II/XT/XTk, you must access
the appropriate parameters. These parameters are arranged in various pages. The front panel
shows the headlines for each parameter page:
Store
User's Manual MicroWave II • MicroWave XT • XTk
Play Multi
001
Hit Me Bigga
, labeled Mode, counterclockwise:
Play Sound A001
Saw Repeat WMF
Sound
Osc.1
Filter 1
Osc.2
Filter 2
Wave 1
Amplifier
Wave 2
Pan
Quality
Glide
Mix
Trigger
Arpeggiator
Play Access
Recall
Compare
Diagram 2: Parameter pages
|
Mode
|Main Vol.
|
Multi
|
|
Mode
|Main Vol.
|
Sound
|
Sound / Multi
. Switching back to Single mode is done in the
Multi
Filter Env.
Volume
Volume Env.
Tempo
Wave Env.
Controls
Free Env.
Name
Instrument
LFO 1
LFO 2
Sound
Modifiers
Tune
Mod Matrix
Range
Arpeggiator
Name
Undo
100
100
.
Global
MIDI
Controls
Volume
Tables
Tune
System
Utility
, also
25
Werbung
Inhaltsverzeichnis
