Multi Mode; Multi Parameters - Waldorf MicroWave XT Bedienungsanleitung

Multi Mode

Multi parameters

The Multi parameters consist of settings which are common to all instruments in a multi
program.
Volume
Tempo
Controls
Keyboard Control
Name
Multi Volume
Determines the master volume for the multi program.
Arpeggiator Tempo
This setting allows one to define a master tempo for all instruments in the multi program. If
extern is selected, the tempo is determined by MIDI clock.
Control W...Control Z
These parameters are used to define modulation sources that are freely definable MIDI
controllers. Each value represents a MIDI controller number that is used when you assign
its parameter as modulation source in the Modifiers or the Modulation Matrix. If global is
selected, the corresponding settings made in the global parameter section are used.
MIDI Send
This setting determines the MIDI channel used for sending notes generated by the XTk's
keyboard. If global is selected, notes are sent on the basic channel selected in the global
parameters section. If specific is selected, notes are sent according to the settings of the
specific instruments.
Name
Use this page to set the multi program's name. First select the character to be modified via
the first value dial. Then change its setting via the second value dial.
User's Manual MicroWave II • MicroWave XT • XTk
Multi Volume
127
Multi Arpeggiator Tempo
130
Control W|Control X|Control Y|Control Z
004 | 008
MIDI Send
global
Position | Character
01 |
0...127
extern / 50...300
0...120 / global
global / specific
| 011
M Hit Me Bigga WMF
| 012
87