Inhaltsverzeichnis
Werbung
The following paragraph describes the function and the result of each modifier function in
detail:
+
-
*
/
XOR
OR
AND
S & H
Ramp
Switch
User's Manual MicroWave II • MicroWave XT • XTk
Returns the sum of Source #1 and Source #2.
Returns the difference of Source #1 and Source #2.
Returns the product of Source #1 and Source #2.
Returns the quotient of Source #1 and Source #2.
Returns the binary exclusive-or operation of Source #1 and Source #2.
Returns the binary or operation of Source #1 and Source #2.
Returns the binary and operation of Source #1 and Source #2.
Samples and holds the value of Source #1 in regular intervals, determined
by the value of Parameter. You can use this function to create rhythmcally
modulations based on a definable source.
Level
Creates a linear ramp from minimum to maximum. The ramp is triggered
each time Source #1 has a positive transition. The rise time is specified by
Parameter. You can use this e.g. to get an additional sawtooth source from
an LFO while another waveform is selected.
Level
Parameter
max.
Returns maximum, if the value of Source #1 is above the value of
Parameter. Otherwise minimum is returned. Use this function to trigger an
action depending on a source signal's value. E.g. applying ring modulation
when notes are played with maximum velocity. You can use this also to
create a pulse signal out of an LFO, where Parameter determines the pulse
width.
Level
Parameter
max.
Source #1
Parameter
S & H function
Time
Source #1
Ramp function
Time
Source #1
Switch function
Time
83
Werbung
Inhaltsverzeichnis
