Inhaltsverzeichnis
Werbung
Status
Status
Determines whether the instrument is disabled or enabled. On the XTk, you can determine
whether the selected instrument is played from the internal keyboard, incoming MIDI notes
or both.
Panning
Determines the position of the instrument within the stereo panorama. The value range
extends from left 64 , which means far left, over the center position to right 63 , which
means far right.
PanMod
This setting decides whether panning modulation is applied or not.
• When set to off , no panning modulation is done at all.
• When set to normal , panning modulation is applied as defined in the single
program that is used for the instrument.
• When set to inverse , panning modulation is done as before, but the modulation
signal is negated and, as a result, the stereo sides are exchanged.
Output
Selects the audio output on which the instrument's signal will appear. Main routes the
instrument to the main outputs Main Out Left/Stereo
Sub routes it to the sub outputs Sub Out Left/Stereo
Tune
Tune
Transpose
Allows one to transpose the instrument in steps of a semitone.
Detune
Fine-tunes the instrument in increments of 64ths of a semitone.
MIDI Send
This XTk parameter is accessible only if the Multi parameter MIDI Send is set to specific . If
set to on , this instrument will send notes on the instrument's selected MIDI channel.
Range
Range 1
Range 2
User's Manual MicroWave II • MicroWave XT • XTk
off / on
off / Keys/MIDI / Keys / MIDI
left 64...center...right 63
off / normal / inverse
Main Out / Sub Out
Transpose| Detune
+12
|
+00
-48...+48
-64...+63
off / on
Lowest
| Highest Velocity
001
|
063
Lowest
| Highest Key
000
|
127
and Main Out Right Mono
and Sub Out Right Mono
Inst. #1
Inst. #1
Inst. #1
,
.
89
Werbung
Inhaltsverzeichnis
