Herunterladen Inhalt Inhalt Diese Seite drucken

Trigger - Waldorf MicroWave XT Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MicroWave XT:
Inhaltsverzeichnis

Werbung

Trigger

The Trigger parameters define how the various envelopes are started. In addition, you can
activate special dual and unisono modes to stack the MicroWave II/XT/XTk's voices.
Trigger 1
Trigger 2
FilterEnv
Determines the way of triggering the Filter Envelope.
• If normal is selected, every note triggers the envelope of its own voice.
• If single is selected, the envelopes of all voices act as one. The envelope is started,
when the first note is played. The sustain phase is held until the last note is
released. Then the release phase is performed.
• If retrigger is selected, the envelope acts as in single mode except that each note
triggers the envelope again from its current value.
Amp. Env
Determines the way of triggering the Amplifier Envelope.
• If normal is selected, every note triggers the envelope of its own voice.
• If single is selected, the envelopes of all voices act as one. The envelope is started,
when the first note is played. The sustain phase is held until the last note is
released. Then the release phase is performed. This setting is only valid, if Mode is
set to Mono . Otherwise the envelope works as if normal is selected.
• If retrigger is selected, the envelope acts as in single mode except that each note
triggers the envelope again from its current value. This setting is only valid, if Mode
is set to Mono . Otherwise the envelope works as if normal is selected.
Wave Env.
Determines the way of triggering the Wave Envelope.
• If normal is selected, every note triggers the envelope of its own voice.
• If single is selected, the envelopes of all voices act as one. The envelope is started,
when the first note is played. The sustain phase is held until the last note is
released. Then the Key-off phase is performed.
• If retrigger is selected, the envelope acts as in single mode except that each note
triggers the envelope again from its current value.
66
FilterEnv|Amp. Env |Wave Env.|Free Env.
normal
| single
Mode
| Assign
Poly
|unisono
normal / single / retrigger
normal / single / retrigger
normal / single / retrigger
| normal
| Detune
|
025
User's Manual MicroWave II • MicroWave XT • XTk
|retrigger
| De-Pan
|
110

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

XtkMicrowave ii

Inhaltsverzeichnis