Waldorf MicroWave XT Bedienungsanleitung Seite 57

• Use the high pass setting 6dB HP to thin out the bass frequencies in order to get a
cleaner and more precious sound.
Keytrack
Determines how much the cutoff frequency depends on the MIDI note number. The
reference note for Keytrack is E3, note number 64. For positive settings, the cutoff frequency
rises on notes above the reference note, for negative settings the cutoff frequency falls up to
higher notes and vice versa. A setting of +100% corresponds to a 1:1 scale, so e.g. when
an octave is played on the keyboard the cutoff frequency changes for the same amount.
If you don't want to use Filter 2, select the low pass and set the cutoff frequency to
127 .
User's Manual MicroWave II • MicroWave XT • XTk
-200%...+197%
57