Herunterladen Inhalt Inhalt Diese Seite drucken

Selecting Sound And Multi Mode - Waldorf MicroWave XT Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MicroWave XT:
Inhaltsverzeichnis

Werbung

This is how you select a program:
1. Use the Page Dial
clockwise increases the program number, turning the dial counterclockwise
decreases it.
2. The display shows the program type (Sound or Multi), the program number and the
name of the selected program (name may be different depending on the soundset
loaded):
Numerical Program Select
On the XTk, you can also select programs via the numeric keyboard section. Entering a two
digit or three number will select the corresponding program within the current bank. E.g. to
select program no. 014 , press 1 followed by 4. To select program no. 109 , press 109.
Bank Hold
The Bank Hold function gives further enhancement to the numerical program select. By
"freezing" the two leftmost digits of the program number, programs can be changed by
typing one single digit of the number. This feature is useful especially in live situations.
This is how you use the Bank Hold function:
• Press the numerical keys
Select button will go on.
• By pressing one of the numerical keys, you can select the last digit of the program
no. E.g. if program no. A021 was selected before, you can switch from A020 to
A029 by pressing the corresponding numerical key.
• To terminate the Bank Hold function, press the Select button
above the button will go off again.
Switching Banks
By pressing the corresponding numeric key labeled A or B while holding the Select button
, you can easily switch from Bank A to B and vice versa. Before the bank switch is
performed, you have to enter a new 2 or 3 digit program number. This is just a precaution
to avoid "jumping" between programs.

Selecting Sound and Multi Mode

As mentioned before, the MicroWave II/XT/XTk can operate in Sound or Multi mode. When
the MicroWave II/XT/XTk is first powered up, Sound mode is selected.
This is how you select the Multi mode:
1. Turn the third value dial
2. The display now shows the program number and the name of the selected Multi
program (name may be different depending on the soundset loaded):
24
to select the appropriated program. Turning the dial
Play Sound A001
Saw Repeat
WMF |
, labeled Mode, clockwise:
|
Mode
|Main Vol.
Sound
|
section's Select button
User's Manual MicroWave II • MicroWave XT • XTk
100
. The Hold LED above to the
again. The LED

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

XtkMicrowave ii

Inhaltsverzeichnis