Lfo1; Modifiers And Modulation Matrix; Modifier Delay; Table 3: Modulation Sources - Waldorf MicroWave XT Bedienungsanleitung

Modifiers and Modulation Matrix

The modifiers allow you to perform mathematical functions on modulation signals.
Depending on the function type selected, calculation is done between two source signals
or between a source signal and a constant parameter. You can use up to four independent
modifier units. The result of each operation is not processed directly but can be used as
input source for the modulation matrix described in the next chapter. Also you can use it
again as source for another modifying process. In addition a separate delay line can be
used to process a modulation source.
The following table shows an overview of all modulation sources available on the
MicroWave II/XT/XTk:
Setting
off

LFO1

LFO1*Modw
LFO1*Prs.
LFO2
FilterEnv
Ampl. Env
Wave Env
Free Env
KeyFollow
Keytrack
Velocity
Rel. Velo
Pressure
Poly Prs.
PitchBend
Modwheel
Sust. Ctr.
Foot Ctr.
BreathCtr.
Control W
Control X
Control Y
Control Z
Ctr Delay
Modify #1
Modify #2
Modify #3
Modify #4
MIDIClock
Minimum
Maximum

Modifier Delay

This function allows one to delay a freely-definable modulation source for an adjustable
period of time.
User's Manual MicroWave II • MicroWave XT • XTk
Description
Modulation off
LFO 1 signal
LFO 1 signal multiplied with Modwheel
LFO 1 signal multiplied with Aftertouch
LFO 2 signal
Filter Envelope signal
Amplifier Envelope signal
Wave Envelope signal
Free Envelope signal
Same as Keytrack , but with pitchbend and glide
MIDI note number
MIDI note velocity
MIDI note release velocity
MIDI aftertouch
MIDI polyphonic pressure
MIDI pitchbend signal
MIDI modulation wheel (controller #1)
MIDI sustain pedal (controller #64)
MIDI foot control (controller #4)
MIDI breath control (controller #2)
Assignable MIDI-Controller 1
Assignable MIDI-Controller 2
Assignable MIDI-Controller 3
Assignable MIDI-Controller 4
Modifier Delay
Modifier #1 result
Modifier #2 result
Modifier #3 result
Modifier #4 result
MIDI clock signal
constant for minimum modulation (equals 0)
constant for maximum modulation (equals +1)

Table 3: Modulation sources

81