Pan - Waldorf MicroWave XT Bedienungsanleitung

Chorus
Enables the chorus effect. The chorus consists of two short delays where delay time is
modulated with a sine wave of about 0.5 Hz. It spreads the stereo image of the program by
giving it a wide sounding character.

Pan

Pan
Panning
Determines the position in the stereo panorama. When the setting is left 64 , the sound is
panned far left, when the setting is right 63 , it is panned far right. If you want to set the
sound into the middle of the stereo panorama, use the center setting. To give further
movement to the sound, set this parameter to a basic value and apply some modulation to
it e.g. via an LFO or the Keytrack parameter.
Keytrack
Determines how much the pan position depends on the MIDI note number. The reference
note for Keytrack is E3, note number 64. For positive settings, the panning moves to the
right on notes above the reference note, for negative settings the panning moves to the left
up to higher notes and vice versa. This feature enables you to give a typical piano-like
panning, where lower notes are on the left side and higher notes on the right. To achieve
this, set the Panning parameter to center and Keytrack to +197 .
User's Manual MicroWave II • MicroWave XT • XTk
off / on
Panning |Keytrack
left 50| +020%
left 64...center...right 63
-200%...+197%
59