Phoenix Contact IBS PCI DDK UM Anwenderhandbuch Seite 151

Set-Sys-Fail-Request ..................... 2-33
Status- und Steuer-Register ........... 2-17
Status-Node-SG-Inf ........................ 2-40
Status-Register 1 .....................2-27
Status-Register 2 ............................ 2-29
Status-Sys-Fail ............................... 2-32
Sub-Node-Register ......................... 2-56
Switch-Memory ............................... 2-42
WDT_Control_Host ........................ 2-10
Release-Device-Driver-Routine .............. 5-9
S
Schalter
Testmode .......................................... 2-7
Schnittstellen ........................................... 2-3
Signal-Interface ..................................... 2-21
Software-Interface ................................... 2-3
Software-Register ................................. 2-17
Speicherverwaltung ............................... 2-17
SRAM .................................................... 2-20
Standardadressraum ............................... 2-3
Statisches RAM ..................................... 2-20
Status-SysFail-Register ........................ 5-25
Strukturen
CHAR devNamesDTI ..................... 5-33
CHAR devNamesMXI ..................... 5-33
T_AVR_CTRL avrCtrl ..................... 5-32
T_DEV_CTRL devCtrl .................... 5-29
T_MSG_CTRL msgCtrl .................. 5-32
T_NODE_CTRL nodeCtrl ............... 5-29
T_NODE_HD_CTRL nodeHdCtrl ... 5-31
T_NOTIFY_CTRL notifyCtrl ............ 5-31
T_SVR_CTRL svrCtrl ..................... 5-32
USIGN16 avrToutCnt ..................... 5-33
USIGN16 msgCnt ........................... 5-33
6189A
USIGN16 svrToutCnt ...................... 5-33
Synchronisations-Request .................... 2-21
Sys-Fail-Interrupt .................................. 2-33
,
4-4 Sys-Fail-Request .........................2-21
Sys-Fail-Signal ...................................... 2-33
SysFail-Signal ....................................... 5-25
Stichwortverzeichnis
,
2-23
A-9