I) Modifying The Steering Directions - Reely SKY Dragonfly Pro Bedienungsanleitung

i) Modifying the steering directions

Your remote control is tuned ex works exactly to your electric powered helicopter. However, if during trimming, you
notice that your model helicopter, with individual steering functions, responds contrary to the pattern illustrated in
figure 10, then you can switch over at the transmitter, for each individual steering function, the direction of the response
of the model (reverse function).
• For that purpose, there is a series of DIP switches (1)
on the rear of the transmitter.
• If a dip switch is in the right switch position, the function
is turned on. If the switch is in the left position, the
function is off or the corresponding control reaction takes
place in the opposite direction.
The switches are assigned the following functions:
DIP switch Function
1 Front swash plate servo
2 Left swash plate servo
3 Engine control
4 Tail servo
5 Auxillary channel (e.g. for chassis)
6 Right swash plate servo
7 Control direction of the gas/tail mixer
8 Mixing program for helicopters
9 Switching the nick function
10 Pitch value adjustment
11 Gas curve and expotential setting
12 Gyro setting and tail mixing
Position
ON
ON
OFF
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
Figure 14
65