C) Servo Expotential Function And Gas Curve - Reely SKY Dragonfly Pro Bedienungsanleitung

c) Servo expotential function and gas curve

The expotential function
• With the servo expotential function, you can set the
contact sensitivity of the 3 swash plate servos in central
range.
These changes have an effect on the nod and roll
function. The previously set pitch values remain
unchanged.
• In order to be able to adjust the servo expotential
function and the gas curve, first put the transmitter into
operation and then connect the charged flight battery
to the adjuster.
• Slide the dip switch 11 (1) from "OFF" to "ON". Now the
function display (2) changes its colour from pink to
yellow.
• With the left adjuster V2 (3), you can now set the desired
value for the expotential function.
100
75
50
25
0 25 50
Stick %
A
• If the adjuster V2 is in central position, the swash plate servos react linear to the control commands of the transmitter
(ill. 22A).
74
100
75
50
25
75 100 0
25 50 75 100
Stick %
B
Figure 22
100
75
50
25
0
25 50 75
Stick %
C
Figure 21
100