K) Setting And Displaying Time Zone; Alarm Function - Conrad 67 23 31 Bedienungsanleitung

k) Setting and Displaying Time Zone

You can set a time deviation (-12 to +12 hours) for different time zones.
• Keep the button "-/ZONE" at the bottom of the weather station pressed until "ZONE" is
displayed at the left of the display and the hours of the time zone flash (approx. 3 seconds).
• Set the desired time zone (-12 to +12 hours) with the buttons "+/
the respective button pressed for quick adjustment.
• To store the setting, briefly press the button "CLOCK".
• If you briefly press "-/ZONE", the time display switches between normal time (DCF signal)
and time zone time (the display also indicates "ZONE").
l) Alarm Function
Displaying alarm time
Briefly press the button "MODE" (3) repeatedly until the LC display shows the alarm time.
"ALARM" is also displayed at the left of the display.
Switching the alarm function on/off
Briefly press the button "ALARM" at the bottom of the weather station to switch the alarm
function on or off.

When the alarm function is switched on, the symbol "
Setting alarm time
• Keep the button "ALARM" at the bottom of the weather station pressed until "ALARM" is
displayed at the left of the display and the hours of the alarm time flash (approx. 3 seconds).
Set the alarm time hours with the buttons "+/
pressed for quick adjustment.
• Briefly press the button "ALARM"; the minutes of the alarm time flash.
Set the minutes with the buttons "+/
for quick adjustment.
• Briefly press the button "ALARM"; you will leave setting mode and all settings will be stored.
" and "-/ZONE". Keep the respective button
" and "-/ZONE". Keep the respective button pressed
" and "-/ZONE". Keep
" appears
51