Displaying/Resetting Maximum Value Storage For Indoor Humidity; Displaying/Resetting Minimum Value Storage For Indoor Humidity - Conrad 67 28 61 Bedienungsanleitung

 Displaying/Resetting Maximum Value Storage for Indoor Humidity
• Touch the display area „IN HUMIDITY" repeatedly until the indoor humidity maximum and the display „MAX" (to the
left of the weather symbols) flash.
• To reset the maximum value storage, keep the display area „IN HUMIDITY" pushed for 3 seconds. The new maximum
is the currently measured indoor humidity until it changes.

To get to the next subfunction (displaying/resetting the minimum value storage for indoor humidity) ->
touch the display area „IN HUMIDITY" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Displaying/Resetting Minimum Value Storage for Indoor Humidity
• Touch the display area „IN HUMIDITY" repeatedly until the indoor humidity minimum and the display „MIN" (to the
left of the weather symbols) flash.
• To reset the minimum value storage, keep the display area „IN HUMIDITY" pushed for 3 seconds. The new minimum
is the currently measured indoor humidity until it changes.

To get back to the first subfunction (setting and activating/deactivating the upper humidity alarm) -> touch
the display area „IN HUMIDITY" briefly 2x
Leaving setting mode -> touch the button „IN HUMIDITY" briefly 1x (or touch another display area wait for
30 seconds without touching the touch screen)
82