B) Display Field For "Temperature/Humidity; Switching The Display Unit °C/°F; Dew Point Display; Display Of The Minimum/Maximum Values For Temperature/Air Humidity - Conrad DV928 Bedienungsanleitung

b) Display field for "Temperature/humidity"


Briefly press the button " " (16) or " " (18) on the rear until the symbol "IN" blinks on the display in
the range of the temperature/air humidity display (see arrow in the image below).
The following setting options and displays are available now:
 Switching the display unit °C/°F
• Keep the button "SET" (7) on the rear depressed until the display unit (°C/°F) for the indoor/outdoor temperature
is switched.
• Release the button again.
 Dew point display
• Briefly press the button "SET" (7) on the rear; "DEW" (= dew point) is displayed on the top right between the values,
and the temperature display is switched.
• If you briefly press the button "SET" (7) once again, the current temperature is displayed again.

The so-called dew point is a temperature point that depends on the concurrence of a certain air
pressure, a certain temperature and a certain air humidity.
Condensation of the air humidity starts at this point and condensation turns into liquid (fog, mist).
If the dew point for water vapour is below 0 °C, the water will condense as snow or hoarfrost.
 Display of the minimum/maximum values for temperature/air humidity
• First select the desired temperature/air humidity sensor with the button "CHANNEL" (4).
• Briefly press the button "MEMORY" (17). "MIN" appears between the temperature/air humidity values and the
minimum values are displayed.
• Briefly press the button "MEMORY" (17) again; "MAX" appears and the maximum values are displayed.
• With another brief press of the button "MEMORY" (17), the display changes to the current measuring values.
86