B) Switching Outdoor Sensors Automatically; C) Display Of Min/Max Values (Temperature/Air Humidity); D) Deleting Min/Max Values - Conrad WS 624 Bedienungsanleitung

A tendency display on the left, next to the temperature display or on the right next to air humidity
shows you the tendency of where the readings are going:
Increasing
TREND TREND

b) Switching outdoor sensors automatically

Changing between the available outdoor sensors can be carried out automatically from the base
station (automatic switching approx. every 3-4 seconds).
Press the "CHANNEL" button for about 2 seconds. The "
automatic switching is activated.
To switch off this function, simply press the "CHANNEL" button again for approx. 2 seconds until
the icon " " disappears again.

c) Display of MIN/MAX values (temperature/air humidity)

• The minimum and maximum values for each sensor are stored separately. This is why you
first have to choose the desired sensor by pressing the "CHANNEL" button.
• By briefly pressing the "MEM" button, you can then switch in sequence between the display
of the minimum value ("MIN" on display), the maximum value ("MAX") and the current value.
• When there is a minimum or maximum value ("MIN" or "MAX" on display) you can switch to
the other sensors with the "CHANNEL" button.

d) Deleting MIN/MAX values

• First of all activate the display of the MIN or MAX values with the "MEM" button.
• Delete all stored MIN/MAX values by pressing the "MEM" button for a longer period of time.
Straight after deleting, the currently read temperature or air humidity values are displayed
as minimum or maximum values.
Steady Decreasing
TREND TREND TREND TREND
" icon will appear on the display when
67