G) Display Or Deletion Of The Maximum/Minimum Values; H) Reset - Conrad RW 53 Bedienungsanleitung

g) Display or Deletion of the Maximum/Minimum Values

Push the button "MIN/MAX" briefly several times to switch between display of the maximum values ("max" in the
display), display of the minimum values ("min") and regular display.
By pushing the button "+" repeatedly, the respective values can be selected and displayed (current value flashes).

Depending on whether you previously selected maximum ("max" in the display) or minimum values ("min"),
the order will differ.
Displaying the maximum values ("max" ) for...
• Wind speed
• Gust speed
• Rain volume of the last hour ("1h")
• rain volume of the last 24 hours ("24h")
• Rain volume of the last week ("week")
• Rain volume of the last month ("month")
• Outdoor humidity
• Outdoor temperature
• Wind chill temperature
• Dewpoint temperature
• Indoor humidity
• Indoor temperature
While a maximum or minimum value is displayed and flashes, it can be deleted by pushing the button "SET" for 3
seconds.
If you do not push any button for 30 seconds, the display mode for maximum/minimum values is left automatically.

h) Reset

To reset all settings to the defaults, keep the button "+" down for about 20 seconds. The weather station will restart. All
display segments will appear briefly; then the weather station will search for the outdoor sensor.

In this case, briefly remove the batteries from the outdoor sensor and insert them again. Proceed as
described in chapters 8. b) and c).
Displaying the minimum values ("min") for...
• Outdoor humidity
• Outdoor temperature
• Wind chill temperature
• Dewpoint temperature
• Indoor humidity
• Indoor temperature
39