Tips For Best Results - Gastroback Design Mixer Advanced Professional Bedienungsanleitung

TIPS foR BEST RESUlTS

IMPoRTANT: Do not remove the lid from the jug during operation to avoid food splashing
and overflowing. Only take the measuring cup out of the central opening of the lid to add
further ingredients.
With the ingredients splashing up to the measuring cup during operation, always interrupt
processing, for adding further ingredients. For this, press the pause button ( ).You can inter-
rupt processing for up to 2 minutes without losing any settings. Simply restart operation by
pressing the pause button ( ) again.
Do not use metal utensils, as they may damage the cutting blades or jug.
When the appliance has been running for 3 minutes in manual mode, it will automatically turn
off. This is a safety feature to protect the motor. See: Solving Problems
• If the volume within the jug is below the maximum line with the motor agitating, the inner
measuring cap can be removed from the lid and further ingredients can be poured through
the opening in the lid during operation.
• Run the Design Mixer Advanced Professional only for the required time duration – do not
over blend ingredients.
• Use the PULSE | ICE CRUSH button, if your food is too thick or coarse to mix up.
• If the volume within the jug is below the maximum filling mark while the motor is agitating,
scraper and frozen dessert pusher can be used during operation. For this, remove the measu-
ring cup from the lid. Always ensure that the lid stays firmly in place.
• Do not exceed the maximum filling mark when adding foods and liquids into the jug.
• Ingredients could stick to the sides of the jug. In this case, use the provided scraper to
scrape your food from the sides of the jug, and push it down back onto the cutting blades.
For this, keep the lid in place and only remove the measuring cup. Thereafter replace the
measuring cup.
• If any moisture or liquid appears on or under the power base during operation,
IMMEDIATELY turn the appliance off, and unplug from the power supply. Immediately remove
the jug, and wipe the power base dry with a dry cloth or paper towel. Do not use the appli-
ance again without having cleared up, whether the jug is leaking and, if so, having replaced
the jug.
• To interrupt processing at any time, press the pause button ( ). To completely CANCEL
operation, press the START | CANCEL button.
• A speed or function can be selected at any time, even while the motor is running. Select
the new speed or program, and the appliance will change operation immediately.
• The maximum amount of ice cubes that the appliance can process is 250 g (approx. 1
standard ice tray).
• Thicker mixtures puree more efficiently if you fill in not more than 0.5 to 1 Litre.
63