Operating The Design Mixer Advanced Professional - Gastroback Design Mixer Advanced Professional Bedienungsanleitung

oPERATINg THE DESIgN MIXER
ADvANcED PRofESSIoNAl
WARNINg:
Operate the appliance on a well accessible, stable, level, dry, and suitable
large table or counter that is resistant against water, fat, and heat. Do not place any delicate
objects near the appliance during operation, to avoid damage.
Do not operate the appliance with the jug empty, to avoid damage to the appliance.
The appliance could move considerably during operation. Keep the appliance in an approp-
riate distance of at least 30 cm on each side to the edge of the working space and furniture,
walls, boards, curtains, other appliances, and any delicate objects to avoid damage due
to heat and splashes. Leave at least 50 cm of free space above and 50 cm in front of the
appliance to prevent the appliance from falling down.
Do not operate the appliance while the jug is empty, to avoid damage to the motor.
1. Place the appliance on a suitable table or counter near an appropriate wall power outlet.
2. Carefully pull the power cord completely out of the power base and insert the plug into the
power outlet.
3. Fill the ingredients into the jug and place the lid on the jug. Slightly press the lid down until
the rim of the lid settles on the rim of the jug.
4. Place the jug onto the power base.
5. Press the ON | OFF button to switch on. The LCD screen is illuminated and shows the current
operating time ›0 secs‹. The ON | OFF button flashes in red. At the lower right corner of the
LCD screen ›READY‹ is shown. The appliance is now ready for use (READY mode).
Tip: The appliance switches off the LCD screen automatically, when being idle for more than
2 minutes. However, the ON | OFF button still flashes red. After 5 minutes, the appliance
switches off completely.
WARNINg:
The motor starts IMMEDIATELY, when pressing a program button or turning the
speed dial. Do not insert any parts of your body (fingers, hair) or foreign objects (e.g. cooking
utensils, clothes) into the jug with the jug placed on the power base, and the ON | OFF button
is flashing, and the LCD screen is illuminated!
How to Use a Pre-Defined Program
1. Simply press the desired program button. The appliance starts working immediately. The
LCD screen shows the still remaining processing time. As soon as the program elapsed, the
appliance automatically switches back to the defaults (READY mode).
Manual Selection of Speed
There are 12 speed settings from STIR through to MILL. STIR mixes more delicate foods with a
slow stirring motion and light pausing to fold ingredients together. MILL is the fastest setting,
and is ideal for milling nuts, grains and seeds. When turning the speed dial, the appliance
starts always with the slowest speed. See: Blending Chart
1. If you wish to operate the appliance for a certain time duration, press the timer buttons (
and ) until the desired time is shown on the LCD screen.
67