High Temperatures-Risk Of Burns - Gastroback Design Mixer Advanced Professional Bedienungsanleitung

In various foreign countries, the specifications for power supplies are subject to incompatible
norms. Therefore it is possible that power supplies in foreign countries do not meet the require-
ments for safe operation of the appliance. Thus, before operating the appliance abroad,
ensure that safe operation is possible.
• Do not use any desk top multi socket outlet, external switching device, or remote control
systems, or extension cord. Utilization of external switching devices (such as a timer or circuits
that can regularly switch the appliance on and off), will lead to possible hazard of the appli-
ance starting by itself due to inadvertent resetting of the overload protector of the motor.
• Always handle power cords with care. The pins of the power plug must be smooth and
clean. Always completely unwind the power cord before use. Do not place the appliance on a
power cord. Power cords may never be knotted, twisted, pulled, strained or squeezed. Do not
let the plug or power cord hang over the edge of the table or counter. The power cord may
not touch hot surfaces or sharp edges. Ensure that no one will pull the appliance by the power
cord. Take care not to entangle in the power cord. Always grasp the plug to disconnect the
power cord. Do not touch the appliance or power plug with wet hands when the appliance
is connected to the power supply.
• Do not allow any liquids to run into the ventilation slots at the rear of the power base, the
operating elements or the drive shaft coupling within the power base. Do not pour or spill
any liquids on the power base or power cord, or let any liquids run down the exterior of the
jug with the jug on the power base. Do not drip or spill any liquids on the power base or
power cord. Do not place the jug on the power base, when the exterior of the jug is wet or
not clean to avoid risk of overheating, electric shock, or fire. Do not immerse the appliance
or power cord in water or other liquids. Do not place the appliance on wet surfaces. When
liquids overflowed or are spilled on the power base or power cord, immediately unplug the
appliance. Thereafter, clean the appliance and let it dry for at least 1 day. See: Care and
Cleaning
• Immediately switch the appliance off (press ON | OFF button) and unplug if the LCD screen
shows »OVERLOAD PROTECTION«. Leave the appliance cool down for several minutes
before switching it on again.
High Temperatures—Risk of Burns
Your new Design Mixer Advanced Professional is designed for heating up food, using the
SOUP program. Additionally, you can process hot food. Doing so, adhere to the following
precautions to avoid scalds and damage.
• Due to the contact with hot food, steam and condensate, the jug, lid, and measuring cup
can get hot during operation and thereafter.
• Do not process boiling hot liquids to avoid boiling over. Allow temperature to drop before
putting into the jug for operation. Always be careful if hot liquid is poured into the jug, as it
could eject out of the jug due to sudden steaming.
• When processing hot liquids, always ensure that the measuring cap is in place. This will
protect you from splashing of hot liquids and excessive amounts of steam during operation.
• Do not put the jug in extremes of heat or cold, for example placing an ice-cold jug into hot
water, or vice versa. Otherwise, the jug could burst.
• Even with the lid properly closed, steam could escape from the lid during operation and
shortly thereafter. This holds especially for the ventilation slits in the lid. Condensate could
58