Repeat Function - Gastroback Design Mixer Advanced Professional Bedienungsanleitung

2. Turn the speed dial to the desired speed setting, shown at the right hand of the LCD screen.
The appliance starts working IMMEDIATELY, as soon as you turn the speed dial. The selected
speed is shown on the LCD screen in a bar display, labelled with the assigned levels.
With no time duration selected, the LCD screen shows the already elapsed time in a count-up.
If you do not stop processing manually, by pressing the START | CANCEL button, the appli-
ance will operate for 3 minutes. Thereafter the motor stops automatically switching back to
READY mode.
However, you can stop operation at any time, using the START | CANCEL button to switch to
READY mode manually.
With a time duration selected, the processing time is shown on the LCD screen in a count-
down. The motor stops automatically as soon as the selected processing time elapsed, and
the appliance goes back to READY mode.
Manually Stopping operation
You can cancel or interrupt any running function at any time, no matter whether you started
a pre-defined program or manual settings.
1. If you wish to cancel any running operation completely, press the START | CANCEL button.
The appliance cancels the currently running function immediately and switches back to the
defaults (READY mode).
2. If you wish to interrupt operation (e.g. for filling in further ingredients), press the pause
button ( ). The motor stops and any running function is interrupted. Now, you may remove
the jug from the power base.
Note: The appliances holds the current settings for up to 2 minutes. Thereafter, it cancels any
functions completely.
3. For carrying on operation, place the jug back onto the power base with the lid correctly in
place, and press the pause button ( ) again.
The appliance continues working immediately.
4. If you wish to cancel the current process completely, press the START | CANCEL button.

Repeat function

To allow a quick repeat of the recently started manually selected process, the last speed
setting is held for 2 minutes in memory. For example, this function is useful, when processing
large amounts in separate portions. However, the repeat function is only available for manual
speed settings, because the pre-defined programs can already be started by simply pressing
a button.
To start the repeat function:
1. Turn the speed dial to start the manual operation. Cancel operation manually by pressing
the START | CANCEL button, or wait until the timer switches back to READY mode. Regardless
whether you have used the timer, or have stopped operation by pressing the START | CANCEL
button, the selected speed is still shown on the LCD screen. However, any timer settings are
lost.
2. Press the START | CANCEL button to re-start operation using the same speed.
68