Communication With Pc; Using Usb Port - PeakTech 1295 Bedienungsanleitung

6. Communication with PC

Touchscreen series digital storage oscilloscope support communications with a PC
through USB or LAN port. You can use the communication software to store,
analyze and display the data.
Here is how to connect with PC. First, install the communication software on the
supplied CD. Then there are several ways of connection to choose from.

Using USB Port

(1) Connection: Use a USB data cable to connect the USB Device port in the
rear panel of the Oscilloscope to the USB port of a PC.
(2) Install the driver: Run the communication software on PC, press F1 to open
the help document. Follow the steps of title "I. Device connection" in the
document to install the driver.
(3) Port setting of the software: Run the software; click "Communications" in the
menu bar, choose "Ports-Settings", in the setting dialog, choose "Connect
using" as "USB". After connect successfully, the connection information in the
bottom right corner of the software will turn green.
Figure 0-1: Connect with PC through USB port
148