DeDietrich DOP490 Serie Betriebsanleitung Seite 65

99633843_ML_A 15 juin.qxd
- Once you have chosen the dish, enter by pressing the selector button
- Place your dish in the oven on the shelf support level
indicated.
- Enter by pressing the button to start cooking.
Note: No preheating is required to use the ICS
function. Cooking must ABSOLUTELY begin in a
cool oven. You should wait for the oven to cool down completely before
beginning a second cooking programme.
IMPORTANT: Do not open the door during
this phase or you may disturb the recording of
data.
This data search phase is symbolised by rotating
arrows.
- A second phase for cooking: The oven has
determined the time required and displays it, along with the cooking end time.
The remaining cooking time indicated takes into account the cooking time from
the first phase. You can now open the door (e.g. to baste a roast).
- The oven beeps and turns off when the cooking time
is over and your screen then indicates that the dish is
ready.
DELAYED START FUNCTION:
To program a delayed start,
select the clock
and change the end of cooking time.
PLEASE NOTE: If you want to programme a subsequent ICS cooking cycle, wait
until the oven has cooled completely. However, you can use the Chef function
even if the oven is hot.
15/06/2005 17:08 Page 65
How does your oven work?
Insert the
dish on
level 1
niveau
1 5 : 3 0
O K
15:30 15:30
200°C 200
19 min 19 min 15:49 15:49
15:49 15:49
It's
C'est prêt !
ready!
Insert the
dish on
niveau
level 1
1 8 : 3 0 O K
GB
65