Useful Dimensions For Installing Your Oven - DeDietrich DOP490 Serie Betriebsanleitung

99633843_ML_A 15 juin.qxd

Useful dimensions for installing your oven

Location of
retaining screw
The oven can be installed under a work top or in a column of cabinetry
(open* or closed) having the appropriate dimensions for built-in instal-
lation (see adjacent diagram).
Your oven has optimised air circulation that allows it to achieve remarkable cooking
and cleaning results if the following guidelines are respected:
• Centre the oven in the cabinet so as to guarantee a minimum distance of 5 mm
between the appliance and the neighbouring cabinet.
• The material of the built-in cabinetry must be heat resistant (or be covered with
such a material).
• For greater stability, attach the oven in the cabinet with two screws through the
holes provided for this purpose on either side of the front inner panel (see diagram).
To do this:
1) Remove the rubber screw covers to access the mounting holes.
2) Drill a Ø 3 mm hole in the cabinet panel to avoid splitting the wood.
3) Attach the oven with the two screws.
4) Replace the rubber screw covers (they also serve to absorb the shock caused
by closing the oven door).
(*) If the cabinet is open, its opening must be 70 mm (maximum).
To be certain that you have properly installed your appliance,
do not hesitate to call on a household appliance specialist.
50
15/06/2005 17:07 Page 50
How do you install your oven?
Location of
retaining screw
70
550
50 x 50 mm cut-out