Change Weight Button - Stryker InTouch Bedienungsanleitung

MAIN MENU: SCALE (CONTINUED)

Change Weight Button

When the "Change Patient Weight" button is pressed on
the Scale screen, Figure 5 . 1 2 will be displayed . Press
"Ok" to change patient weight .
When Ok has been pressed, the "Do not touch bed"
message will be displayed as shown in Figure 5 . 1 3 .
When the "Do not touch bed" message disappears
Figure 5 . 1 4 will be displayed .
Press the up or down arrows as show in Figure 5 . 1 4
to increase or decrease the weight . The weight will
increment or decrement by 0 . 1 lb or kg . If the arrows are
pressed longer than just a touch, the incrementation/
decrementation will change by 1 lb or kg . To save the
new weight, press "Ok" .
www.stryker.com
Footboard Operation Guide
2131-209-005 REV B
Message
Change
Patient Weight?
Figure 5.12
Message
Do not
touch bed
Figure 5.13
Change Patient Weight
Weight
0.0 lbs
Figure 5.14
Return To Table of Contents
Ok Cancel
Close
Ok Cancel
1-35