Herunterladen Diese Seite drucken

a-TroniX AX Plus 5kW Installations- Und Bedienungsanleitung Seite 78

Hybridwechselrichter

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Installation guide / User manual
AX Plus 5-15kW 3ph Hybrid Inverter
2. Safety
2.1 Appropriate Usage
AX Plus series inverters are designed and tested in accordance with
international safety requirements. However, certain safety precautions must be
taken when installing and operating this inverter. The installer must read and
follow all instructions, cautions and warnings in this installation manual.
• All operations including transport, installation, start-up and maintenance, must
be carried out by qualified, trained personnel.
• The electrical installation & maintenance of the inverter shall be conducted by
a licensed electrician and shall comply with local wiring rules and regulations.
• Before installation, check the unit to ensure it is free of any transport or
handling damage, which could affect insulation integrity or safety clearances.
Choose the installation location carefully and adhere to specified cooling
requirements. Unauthorized removal of necessary protections, improper use,
incorrect installation and operation may lead to serious safety and shock
hazards or equipment damage.
• Before connecting the inverter to the power distribution grid, contact the local
power distribution grid company to get appropriate approvals. This connection
must be made only by qualified technical personnel.
• Do not install the equipment in adverse environmental conditions such as in
close proximity to flammable or explosive substances; in a corrosive or desert
environment; where there is exposure to extreme high or low temperatures; or
where humidity is high.
• Do not use the equipment when the safety devices do not work or are disabled.
• Use personal protective equipment, including gloves and eye protection during
the installation.
• Inform the manufacturer about non-standard installation conditions.
• Do not use the equipment if any operating anomalies are found. Avoid
temporary repairs.
• All repairs should be carried out using only approved spare parts, which
must be installed in accordance with their intended use and by a licensed
contractor or authorized service representative.
• Liabilities arising from commercial components are delegated to their
respective manufacturers.
• Any time the inverter has been disconnected from the public network, please
be extremely cautious as some components can retain charge sufficient to
Page 78
atx054en0225

Werbung

loading