Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation guide / User manual
AX Plus 5-15kW 3ph Hybrid Inverter
6.14 Inverter Start-Up
Please refer to the following steps to start up the inverter.
1. Ensure the inverter fixed well.
2. Make sure all the DC wirings and AC wirings are completed.
3. Make sure the meter is connected well.
4. Make sure the battery is connected well.
5. Make sure the external EPS contactor is connected well (if needed).
6. Make sure the BMS buttons and battery switches are off.
7. Turn on the PV/DC switch, AC breaker, EPS breaker and battery breaker.
8. Enter the settings page, default password is ,0000', select START / STOP and set
it to start. (long press „enter" to quickly go to the START / STOP page).
NOTE:
When starting the inverter for the first time, the country code will be
set by default to the local settings. Please check if the country code is
correct.
Set the time on the inverter using the button or by using the APP.
6.15 Inverter Switch Off
Please refer to the following steps to switch off the inverter.
1. Enter the settings page, select START / STOP and set it to stop.
2. Turn off the PV/DC switch, AC breaker, EPS breaker and battery breaker.
3. Wait 5 min before you open the upper lid (if in need of repair).
atx054en0225
Page 123
Werbung
