Changing The Display Language - Kls Martin Group Sonicweld Rx Gebrauchsanweisung/Technische Beschreibung

Instructions for Use / Technical Description
Ultrasonic Unit SonicWeld Rx
4.3.3

Changing the Display Language

The display language has been factory-preset to English. Users can select a different language
by proceeding as follows:
Place the ultrasonic unit (1, front fold-out page) on a level, dry and solid surface.
•
Connect a handpiece (8, front fold-out page) to a connecting socket (2,
•
front fold-out page), inserting the plug of the connecting cable fully into the socket.
Connect the mains cable first to the unit (5, front fold-out page) and then to a grounding
•
socket-outlet. Once connected to a mains socket-outlet, the unit automatically goes into
standby mode.
With the unit in standby mode, simultaneously operate the hand activation pushbutton
•
(10, front fold-out page) and the On/Standby switch (4, front fold-out page) and hold
them down until the display lights up.
Using the hand activation pushbutton, you can now select among the following
•
languages: German, English, French, Spanish, and Portuguese.
Confirm your preferred language by operating the On/Standby switch. This turns off the
•
unit automatically.
Upon turning on the unit again with the On/Standby switch, the display language will have
•
been changed as desired for future use.
V. 1.0
®
53