Preparation And Installation; General Information; Setting Up Sonicweld Rx - Kls Martin Group Sonicweld Rx Gebrauchsanweisung/Technische Beschreibung

Instructions for Use / Technical Description
Ultrasonic Unit SonicWeld Rx
4.3

Preparation and Installation

4.3.1

General Information

Gebrüder Martin only guarantees the proper functioning of the device only if the following rules
are observed:
National requirements for installation and operation
•
National requirements for fire and explosion prevention
•
• The recognized rules applicable when connecting sterilized device components to non-
sterile equipment!
WARNING
Danger of injury from electric shock!
To prevent any risk of electric shock, this device may only be connected to a 100–240 VAC
power supply system having a protective conductor.
NOTICE
®
The SonicWeld Rx
compatibility (EMC), so when setting it up and putting it into operation, be sure to follow the
EMC instructions provided in this user manual, see section 9 "Guidelines and Manufacturer's
Declaration Regarding Electromagnetic Compatibility (EMC)", page 71.
NOTICE
Portable and mobile RF communication equipment can adversely affect the SonicWeld Rx
system.
4.3.2

Setting up SonicWeld Rx

NOTICE
®
The SonicWeld Rx
must always be placed on a level, dry and solid surface.
•
must be set up and operated in the non-sterile area of the operating environment.
•
Connect the handpiece (8, front fold-out page) to the connecting socket (2,
•
front fold-out page). After inserting the plug of the connecting cable fully into the socket
and rotate to lock it in place.
V. 1.0
®
system requires special precautions regarding electromagnetic
®
ultrasonic unit (1, front fold-out page):
®
51