Philips AVENT SCD971 Bedienungsanleitung Seite 47

PARENT UNIT
Why does my baby
monitor manage a much
smaller distance than
specified in this user
manual?
Why can't I establish a
connection between the
Parent Unit and Baby
Unit? Why is the
connection lost every
now and then? Why are
there sound
interruptions?
Why does the app/Parent
Unit react too quickly to
other sounds than my
baby makes?
Why don't I hear a sound
from the Parent
Unit? Why the Parent
Unit is not transmitting
sounds?
Why do I get interference
on the Parent Unit? Why
does the video display on
the Parent Unit flicker?
Why does the Parent Unit
make a buzzing sound?
The specified operating range between the Parent Unit and Baby Unit is up to
400 meters, and it's only valid outdoors in open air and in the line of sight.
Depending on the surroundings and other disturbing factors, the operating
range may be smaller.
Inside your house, the operating range is up to 50 meters, which is also limited
by the number and type of walls and/or ceilings between the Parent Unit and
the Baby Unit.
The Baby Unit and the Parent Unit are probably close to the outer limits of the
operating range or there is interference from other 2.4 GHz wireless devices.
Try a different location, decrease the distance between the units or switch off
other 2.4 GHz wireless devices (laptops, mobile phones, microwaves, etc).
Maybe the router connection of the Baby Unit is not strong or steady.
Check the router signal strength of your Baby Unit on the Baby Monitor+ app, if
it is weak, try moving the router closer to the Baby Unit or using Wi-Fi extenders
to ensure a strong and steady connection for an optimal performance.
The sensitivity level may be set too high. When your baby makes soft sounds,
the sensitivity has to be higher. However, the noisier the nursery room is, the
lower the sensitivity level can be set. You can change the sensitivity of your baby
monitor on the Parent Unit's menu.
Perhaps the Parent Unit is muted. Unmute it by pressing the top part of the
control button and adjust the volume.
Perhaps you have muted on the app. Unmute it by tapping the mute icon on the
video screen.
The sensitivity is set too low. Increase the sensitivity in the Parent Unit's menu or
the app to a higher level.
The Baby Unit may be too far away from your baby. Make sure the Baby Unit is
not further than 1.5 meters away from your baby for optimal sound detection.
Interference may occur when the Parent Unit is out of range of the Baby Unit. If
there are too many walls or ceilings between the Parent Unit and the Baby Unit.
Or when other 2.4 GHz wireless devices are switched on (e.g. microwave, Wi-Fi
router).
Put the Parent Unit in a different place, closer to the Baby Unit, or switch off
other wireless devices.
47
English