Philips AVENT SCD971 Bedienungsanleitung Seite 16

16
English
2
1
5 Take the two poles and push them together to make one longer pole.
Note: You will hear a small click when they are secured.
6 Then, with the power cord first, insert the pole through the opening of the
clamp.
7 Align the pole into position by using the dots on the pole and clamp, and
rotate it 45° clockwise to lock it into place.
8 The bottom of the pole is telescopic, so you can extend it down to the floor.
Make sure to place the power cord in one of the slots provided at the end of
the tube towards a power outlet.
9 Run the cord where the floor and wall meet. Using the provided power
adapter, attach the cord from the pole and plug it into a power outlet.