Philips AVENT SCD971 Bedienungsanleitung Seite 31

o
20.3 C
o
Video 20.3 C
Menu
Cry translation
Connection to Baby Unit
Nightlight
Zoom
Temperature alert >
o
Video 20.3 C
Temperature alert
Switch on
High 20
Low 16
Set Unit °C
o
Video 20.3 C
Temperature alert
Switch on
High 20
Low 16
Set Unit °C
o
Video 20.3 C
20
High temperature alert
Note: The current temperature in your baby's room is shown in the status bar
of the Parent Unit.
1 Press the menu button on the bottom right of the Parent Unit.
2 Select ''Temperature alert'' and press the confirm button to access the
temperature alert feature.
3 The temperature alert can be set on or off, press the confirm button to turn it
on or off.
4 To change the maximum and minimum temperatures for the temperature
alert, select the desired temperatures in the temperature menu.
Tip: You can switch the temperature unit between C (Celsius) and
F (Fahrenheit) by selecting the unit option.
5 Press the left part of the control button to save the new setting and return to
the main menu.
The Parent Unit shows this alert when the measured temperature goes
outside the range between the minimum and the maximum values.
31
English