Philips AVENT SCD971 Bedienungsanleitung Seite 39

Audio mode
Audio 20.3 o C
Modes & Volume sensitivity
Video
< >
Audio
Eco
Privacy
Baby Unit is accessible through the Baby Monitor+ App
20
20
Eco mode
o
Video 20.3 C
Modes & Volume sensitivity
Video
Audio
Eco > >
Privacy
Baby Unit is accessible through the Baby Monitor+ App
20
1 Press the mode button on the top left of the Parent Unit.
2 Press the bottom part of the control button to switch to Audio mode.
3 Press the confirm button to select the Audio mode.
When the Audio mode is activated, the display of the Parent Unit will switch off.
Note: The status bar is not visible when the display is off.
Note: The white link light shows that the Parent Unit is still on and connected to
the Baby Unit.
Note: When sensitivity is not set to the highest level, low sounds will be muted.
Note: Set the sensitivity level to the highest to have continuous sound on the
Parent Unit. Please see the ''Modes and sensitivity'' chapter for more
information.
If your baby makes any sound, the sound level lights turn on and the sounds
detected by the Baby Unit are transmitted to the Parent Unit. As long as no
sound is detected, the sound level lights are off.
1 Press the mode button on the top left of the Parent Unit.
2 Press the bottom part of the control button to switch to Eco mode.
3 Press the confirm button to select the Eco mode.
Note: When the display is on, the selected mode will be visible in the status
bar. The status bar is not visible when the display is off.
The display and sound level lights switch off when there is no sound detected for
20 seconds. The Eco-mode light turns white to indicate that the Parent Unit is
still on and Eco mode is active.
39
English