Philips AVENT SCD971 Bedienungsanleitung Seite 45

Storage
Ordering accessories
Recycling
Removal of built-in rechargeable battery
When you are not going to use the baby monitor for a long time, store the
Parent Unit, the Baby Unit and adapters in a cool and dry place.
To optimize battery lifespan during long periods of inactivity or storage, it is
recommended that you charge your Parent Unit to 50% before turning it off.
To buy accessories or spare parts, visit www.philips.com/parts-and-accessories
or go to your Philips dealer. You can also contact the Philips Consumer Care
Center in your country (see the international warranty leaflet for contact details).
-
This symbol means that electrical products and batteries shall not be disposed
of with normal household waste.
-
Follow your country's rules for the separate collection of electrical products
and batteries.
The built-in rechargeable battery must only be removed by a qualified
professional when the appliance is discarded. Before removing the battery, make
sure that the appliance is disconnected from the wall socket and that the battery
is completely empty.
Take any necessary safety precautions when you handle tools to
open the appliance and when you dispose of the rechargeable
battery.
When you handle batteries, make sure that your hands, the
product and the batteries are dry.
To avoid accidental short-circuiting of batteries after removal, do
not let battery terminals come into contact with metal objects (e.g.
coins, hairpins, rings). Do not wrap batteries in aluminum foil. Tape
battery terminals or put batteries in a plastic bag before you
discard them.
Procedure:
1 Use a coin to unlock the openings of the battery compartment on the back of
the Parent Unit.
2 Remove the 2 rubber feet at the bottom of the Parent Unit.
3 Remove the 2 screws that are now visible at the bottom of the Parent Unit.
4 Pull apart the battery compartment from the Parent Unit.
5 Remove the battery.
45
English