Philips AVENT SCD971 Bedienungsanleitung Seite 19

8 At about the half-way point, the pole will no longer slide down and needs to
be locked into position. Using the dots on the pole and wall mount bracket,
align the pole into position, and rotate it 45° clock-wise to lock it into place.
9 The bottom of the pole is telescopic, so you can extend it down to the floor.
Make sure to place the power cord in one of the slots provided at the end of
the tube towards a power outlet.
10 Run the cord where the floor and wall meet. Using the provided power
adapter, attach the cord from the pole and plug it into a power outlet.
2
1
11 Attach the Baby Unit to its cradle by aligning the pegs to the holes at the
bottom of the Baby Unit and pushing down.
1
2
12 Slide the Baby Unit forward to lock it into place and connect the USB-C power
cable into the back of the Baby Unit.
19
English