Philips AVENT SCD971 Bedienungsanleitung Seite 17

1
2
o
Video 20.3 C
Wall mount
2 x Φ6
1
2
2a
2b
10 Attach the Baby Unit to its cradle by aligning the pegs to the holes at the
bottom of the Baby Unit and pushing down.
11 Slide the Baby Unit forward to lock it into place and connect the USB-C power
cable into the back of the Baby Unit.
12 Tilt your Baby Unit slightly up, down, right, or left to ensure the mattress
becomes entirely visible with your baby in the center. Use your Parent Unit or
Baby Monitor+ app to ensure the Baby Unit is in the best position. Adjust the
Baby Unit to see your baby's mattress is centered and level on the screen.
1 Take out the 2-in-1 mount, clamp, power adapter, screws and anchors, wall
mount template, and the Baby Unit.
2 Remove the wall mount bracket from the clamp by turning the knob
counterclockwise with one hand while guiding the bracket out with the other
hand.
17
English