Philips AVENT SCD971 Bedienungsanleitung Seite 40

40
English
o
eco 20.3 C
20
Privacy mode
o
Video 20.3 C
Modes & Volume sensitivity
Video
Audio
Eco
Privacy
Baby Unit is not accessible through the Baby Monitor+ App
Video 20.3 o C
20
App
20
Soothing sounds
When sound is picked up by the Baby Unit, the display and sound level light of
the Parent Unit turn on immediately. The video and sounds are transmitted to
the Parent Unit and the sound level lights turn white.
As long as no sound is detected, the sound level lights are off.
Note: The minimum sound level to activate sound and display is defined by the
sensitivity setting.
1 Press the mode button on the top left of the Parent Unit.
2 Press the bottom part of the control button to switch to Privacy mode.
3 Press the confirm button to activate the Privacy mode.
When the Privacy mode is activated:
1 You can still monitor your baby from the Parent Unit.
Note: When the display is on, the privacy mode indicator is shown in the
status bar. The status bar is not visible when the display is off.
2 You cannot monitor your baby from the app.
Note: The status light of the Baby Unit turns blue. You will receive a push
notification from the app.
Note: When you try to monitor via the app it will display that the Baby Unit is
in Privacy mode.
To activate it from the Parent Unit, follow the instructions below: