Philips AVENT SCD971 Bedienungsanleitung Seite 23

Philips Avent Baby Monitor
o
Video 20.3 C
o
Video --.- C
?
4 Make sure that the Parent Unit and the Baby Unit are at least 2.5 meters away
from each other to avoid acoustic feedback.
Note: If you use a cordless phone, wireless video, Wi-Fi network, microwave
oven or Bluetooth device on 2.4 GHz and you might experience interference
on either the Parent Unit or Baby Unit, move the Parent Unit until there is no
more interference.
5 Press the On/Off button for 1.5 seconds to turn on the Parent Unit.
The display turns on, the Philips shield appears on the display and the link light
turns red. The Parent Unit starts to search for the Baby Unit.
When the Parent Unit and Baby Unit are linked, the link light turns white on the
Parent Unit and one or more signal strength bars appear on the display.
Note: It takes about 15 seconds to establish the link between the Parent Unit
and the Baby Unit.
Make sure that the Baby Unit is switched on. When the Baby Unit is switched off,
the display of the Parent Unit will show the out of range image.
If no connection has been established, the link light turns red, the Parent Unit
alert will sound about every 25 seconds and the out of range image appears on
the display.
23
English