Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting the Device
Circuit diagram for automatic and manual EPS release
The EPS function can be triggered automatically or manually
as desired.
If you want to trigger the EPS function manually, install an external
switch for this according to the following wiring diagram.
Note: In case of discrepancies between the wiring method
according to the local regulations and the following instruc-
tions, especially with regard to the wiring of the neutral line,
the grounding and the RCD, contact a suitably qualified elec-
trician or the customer service before commissioning!
The wiring diagram is for reference only; the entire electrical
connection must comply with local regulations.
Battery
Inverter
PV
Grounding screw hole
at the lower right corner
Normal loads
91
Werbung
