KKT KOLBE HKW10-1P3 Benutzerhandbuch Seite 198

Connecting the Device
8.3 Gridconnection
WARNING!
Risk of electric shock!
If the device is connected by unqualified persons,
there is a risk of fatal electric shocks!
Connection to the grid may only be carried out by a suitably
qualified electrician in compliance with the applicable
regulations and standards!
Requirements for the grid connection
Please note the following with regard to the inverter properties:
• The inverter is designed for three-phase grids.
• The voltage is 230 / 400 V, the frequency is 50 Hz.
This can be adjusted in the settings.
• Other technical specifications should comply with the require-
ments of the local public grid.
• Observe the following recommendations for cables
and micro-breakers:
Cable and micro-breaker
recommendations for the grid-connection
Cable
Micro-breaker
• A micro-breaker should be installed between the inverter
and the grid;
no load should be connected directly to the inverter.
88
4 - 6 mm
2
20 A