KKT KOLBE HKW10-1P3 Benutzerhandbuch Seite 154

Operation and Setting
4.5 User setting
Use the escape key
and proceed as follows.
Setup
Password entry
To access the settings, it is necessary to enter
the user password.
The default password is"00000".
For entering use the up/down keys
input digits one by one and the enter key
the input and move the cursor forward.
To move the cursor backwards, use the escape key .
Setup options
Use the up/down keys
of the following options:
1: System setting
2: Battery parameters
3: Grid standard
4: Operating parameters
5: 485 address
6: 485 baud rate (transmission speed)
7: Display language
8: LCD backlight
9: Date / time
10: Clear history
11: Password setting
12: Maintenance
13: Reset to factory settings
Confirm your selection with the enter key .
To return to the first page of the user setting instead,
use the escape key .
44
to enter the user settings interface
/
/ to select the desired one
to adjust the
to confirm
--USER--
1: SETUP
2: INQUIRE
3: STATISTIC
--PASSWORD--
INPUT: XXXXX
--SETUP--
1: SYS SETTING
2: BAT SETTING
3: GRID STD
4: RUN SETTING
5: 485 ADDRESS
6: BAUD RATE
7: LANGUAGE
8: BACKLIGHT
9: DATE/TIME
10: CLEAR REC
11: PASSWORD
12: MAINTENANCE
13: FCTRY RESET