KKT KOLBE HKW10-1P3 Benutzerhandbuch Seite 171

Editing the plant information
• Confirm the plant location (1).
Note: The location of the plant is
automatically determined by the GPS
function when the corresponding
release is given.
• If you want to change the location,
select the "Map" icon (1.1)
or enter the address manually in the
address field (1.2).
• Select your plant type from the
following options (2):
• Resi Roof (Residential Roof)
• Industrial
• Commercial
• Utility
• Select your grid type from the following options (3):
• Distributed Self Use Left on Grid
• Distributed All Power on Grid
• Ground All Power on Grid
• Offline
• Storage System
• Enter the plant capacity (4, kWp)
• You may keep the default settings in the rest of blank.
Electricity and acquisition costs can also be entered.
1
1.2
2
3
4
Operation and Setting
1.1
61