Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting the Device
7. Mounting the Device
7.1 Important notes and installation requirements
For installation, all instructions and spacing requirements in this
manual, as well as all applicable regulations, must be observed and
complied with.
Requirements for the installation site
This inverter is intended for outdoor installation
(Protection class IP 65).
Make sure that the installation site meets the following conditions
during installation and operation:
• Not in direct sunlight
• Not in areas where highly flammable materials are stored
• Not in potential explosive areas
• Not in the cool air directly
• Not near the television antenna or antenna cable
• Not higher than altitude of about 2000m above sea level
• Not in environment of precipitation or humidity (> 95%).
• Under good ventilation condition
• Ambient temperature in the range of -20°C bis +60°C
76
Werbung
