KKT KOLBE HKW10-1P3 Benutzerhandbuch Seite 167

Password change (PASSWORD)
To change the input password for the setting options, use
the up/down keys
and the enter key
cursor backwards.
To move the cursor forward and return to the setting op-
tions selection, use the escape key. .
Maintenance (MAINTENANCE > PASSWORD)
This setting interface is not intended for customers.
Resetting to factory setting
(FCTRY RESET / FACTORY RESET)
To reset all settings to the default settings when the device
was delivered or to cancel this,
use the up/down keys
option from the following:
1: Cancel the process
2: Confirm reset
Confirm your selection with the enter key .
To cancel the process and return to the setting options,
use the escape key .
/ to adjust input digits individually
to confirm each input and move the
/ to select the appropriate
Operation and Setting
--PASSWORD--
OLD: XXXXX
NEW: XXXXX
CONFIRM: XXXXX
--PASSWORD--
INPUT: XXXXX
--FACTORY RESET--
1: CANCEL
2: CONFIRM
57