Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting the Device
7.2 Mounting preparation
Observe the following instructions when preparing for installation:
• Follow the instructions given in the chapter "Notes before use"
before installing the device.
• Have the following ready to install the device:
• Unit and accessories supplied:
Inverter,
screws supplied and wall bracket,
this manual
• Screwdriver(1)
• Manual wrench (2)
• For later connection:
Crimping pliers (3) for binding post and RJ 45
• Drilling machine (4) + Drill with diameter
according to the assembly material
• Measuring tool and possibly spirit level
• Pencil or similar for markings
• Protective gloves or similar
• If desired, padlock or similar
for protection against theft
• Check the condition and current carrying capacity of the elec-
trical cables with regard to the requirements specified in the
technical data.
78
1
2
3
4
Werbung
