KKT KOLBE HKW10-1P3 Benutzerhandbuch Seite 124

Important Savety Instructions
 A TTENTION!
Causesfordamageandfunctionalimpairments!
• An overvoltage can cause permanent damage to the
inverter or other equipment that is not covered by
the warranty!
The installer must ensure that the DC input voltage
is less than or equal to the maximum DC voltage.
Since the device is not equipped with SPDs (Surge
Protection Devices) on either the DC or AC side,
install surge protection devices (SPDs) with surge
fuses as described in the relevant section.
• During installation, follow the relevant instructions in
this manual exactly to avoid damage due to inade-
quate installation.
• Do not install the unit near corrosive substances and
protect it from moisture.
• Always keep the appliance in a clean condition to
prevent dirt build-up.
• To avoid damage to the surfaces, do not use ag-
gressive or abrasive cleaning agents and follow the
instructions in the chapter "Cleaning and mainte-
nance".
14