Herunterladen Diese Seite drucken

Marzocchi SHIVER 50 Betriebs- Und Wartungsanleitung Seite 54

Werbung

IT
4.6 Rimozione gruppo cartuccia
A
!
TTENZIONE
Questa operazione deve essere eseguita solamente
dopo avere scaricato completamente l'olio contenuto
all'interno dello stelo.
Bloccare il piede portaruota (70) in morsa.
Svitare il dado inferiore di bloccaggio della cartuccia (48)
con una chiave a bussola da 21 mm.
Rimuovere il dado inferiore di bloccaggio della cartuccia (48).
Sfi lare il gruppo cartuccia completo (21) dal tubo portante.
Sfi lare dall'interno del portastelo (11), la molla (19) e il
distanziale di precarica (17).
52
EN
4.6 Removing the cartridge unit
W
!
ARNING
This operation must be done only after having drained all
of the oil out of the fork leg.
Clamp the wheel axle clamp (70) in the vice.
Unscrew the lower cartridge nut (48) with a 21 mm
socket wrench.
Remove the lower cartridge nut (48).
Pull the cartridge (21) off the stanchion.
Remove the spring (19) and the pre-load spacer (17) from
inside the slider (11).
21 mm
48
70
21
19
17
11

Werbung

loading