Object 6000H: Operating Parameters; Object 6002H: Total Measuring Range In Steps - TR-Electronic LP-46 Bedienungsanleitung

8.11 Object 6000h: Operating Parameters

The object with index 6000h only supports the function for the counting direction.
The counting direction defines whether rising or falling position values are output when
the magnet moves towards the end of the rod.
Index
Description
Data type
Category
Access
PDO mapping
Value

8.12 Object 6002h: Total measuring range in steps

The measuring range stored in the measuring system and the resolution stored in
Object 6005 Sub-Index 1 "Position step" are used to define the Total number of
steps across the entire measuring range. The object can only be read.
Index
Description
Data type
Category
Access
PDO mapping
Standard value:
The measuring length specified on the type plate multiplied with 20, according to the
stored resolution in Object 6005, Sub-index 1 "Position step".
Printed in the Federal Republic of Germany
01/14/2022
0x6000
Operating Parameters
UNSIGNED16
Mandatory
rw
No
2
Bit 2 and 2
2
Bit 2 and 2
0x6002
Total Measuring Range
UNSIGNED32
Mandatory
ro
No
Total measuring range in steps
Byte 0 Byte 1
7 0 15
2 to 2 2
Measuring length
TR-ELA-BA-DGB-0020 v04
3
= 0: Position rising at rod end
3
= 1: Position falling at rod end
Byte 2
8 23
to 2 2 to 2
Measuring

in steps
resolution
Byte 3
16 31 24
2 to 2
length [ mm ]
[ mm ]
 TR-Electronic GmbH 2013, All Rights Reserved
Page 117 of 128