Checking The Software Version - Abicor Binzel iROB 501 Originalbetriebsanleitung

® ®
iROB 501, iROB 401, iROB

7.9 Checking the software version

Fig. 14
A Product
B Main version
P## ### Ver. ### ### ### ###
Tab. 17
Indicator
1
2
3
4
5 or higher
®
301
Checking the software version
A B C D
Software version display
Left digital display
C Sub-version
D Upgrade version
Display content
Product no.
Main version
Sub-version
–
Version for manufacturer and service department
Set the main switch to <0>.
1
F
Press and hold the <Function> button and set the main
2
switch to <I>.
The product number is displayed in the left and right digital
displays.
F
To display the next version digit, press the <Function>
3
button.
(The indicators that follow the upgrade version are
reserved for the manufacturer. It is not necessary to
check them.)
After checking, set the main switch to <0>.
4
The mains control LED is extinguished. The device returns to
its normal state the next time it is switched on.
7 Operation
Right digital display
Product no.
–
Sub-version
Upgrade version
EN - 51