Signs And Symbols Used; Classification Of The Warnings - Abicor Binzel iROB 501 Originalbetriebsanleitung

® ®
iROB 501, iROB 401, iROB
Fig. 3
The device is labeled by means of a nameplate.
► For inquiries, please have at hand the device type, device number, and year of construction as
indicated on the nameplate.

1.3 Signs and symbols used

The following signs and symbols are used in the operating instructions:
1
A

1.4 Classification of the warnings

The warnings used in the operating instructions are divided into four different levels and shown prior to
potentially dangerous work steps. Depending on the type of danger, the following signal words will be used:
Describes an imminent threatening danger. If not avoided, it may cause severe injuries or death.
Describes a potentially dangerous situation. If not avoided, this may result in death or serious injuries.
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results, material damage, or irreparable damage to the device or
equipment.
®
301
®
iROB 301 nameplate
General instructions.
Steps to be carried out in succession.
Lists.
Cross-reference symbol indicating detailed, supplementary, or further information.
Caption, item description.
DANGER
WARNING
CAUTION
1 Identification
EN - 5